Sterownik automatyki sieciowej NX2008031
ITI 2012-8S manages in Local or Remote mode from a scada, up to eight substation MV swithgears.
| Kod produktu | NX2008031 |
| GTIN | 03700540430950 |
| Nazwa | Sterownik automatyki sieciowej Control box ITI 2012-8S |
| Wymiary | |
|---|---|
| Ciężar | 40 kg |
| Wysokość | 660 mm |
| Szerokość | 600 mm |
| Długość | 310 mm |
| Standards | |
| Normy | HN 64-S-44 |
| Parametry elektryczne | |
| Rated Voltage (Ur) | 0.23 kV |
| Maks. napięcie znam. izolacji | 2kV 50Hz 1min 10kV 50Hz 1min on BT Input; 20kV 1.2/50µs inpluse |
| Napięcie znamionowe udarowe wytrzymywane | 5 kV |
| Cechy | |
| Communication protocols | IEC 60870-5-101, IEC 60870-5-104, DNP3 serial, MODBUS RTU, HNZ |
| Communication media | Digital radio, GSM/GPRS, xG router, optic fiber, PSTN |
| Protection relay | Definite time earth fault and definite time overcurrent fault detection Directionnal Earth fault and overcurrent fault detection |
| Stopień ochrony | IP2XC |
| Automation | Auto sectionalizing Function (ASF) Automatic Switching of Power Sources (ASPS) |
| Measurements | Network load current on each phase MV voltage measured through the MV/LV voltage transformer 1000 time stamped events |
| Czujnik | - 3 openable Toroidal Current sensors ratio 500/1 per way - 3 voltage sensor used for Directionnal fault detection |
| Configuration | With a laptop equipped with a browser |
| Installation | Installation on a wall of substations |
| Karton | |
|---|---|
| Rozmiar | 1 pce |
| Waga | 40.050 kg |