Sterownik automatyki sieciowej NX2009706
e-RTU 2020-1A manages in Local or Remote mode from a scada overhead line LBS AUGUSTE.
| Kod produktu | NX2009706 |
| GTIN | 3700540434538 |
| Nazwa | Sterownik automatyki sieciowej Control box e-RTU2020-1A |
| Ciężar | 35 kg |
| Wysokość | 340 mm |
| Szerokość | 310 mm |
| Długość | 625 mm |
| Normy | HN 64-S-44 |
| Rated Voltage (Ur) | 0.23 kV |
| Maks. napięcie znam. izolacji | 2kV 50Hz 1min 10kV 50Hz 1min on BT input; 20kV 1.2/50µs impulse |
| Napięcie znamionowe udarowe wytrzymywane | 5 kV |
| Communication protocols | IEC 60870-5-101, IEC 60870-5-104, DNP3 serial, DNP3 IP, MODBUS RTU, MODBUS IP, IEC 61850 (under development). Protocols redundancy available |
| Communication media | Digital radio, GSM/GPRS, xG router, optic fiber, PSTN, Communication media redundancy, Secured communications with secure tunnels such as VPN, OpenVPN, IPSec. Secure hardware design. |
| Protection relay | Definite time earth fault and definite time overcurrent fault detection Directional earth fault and overcurrent fault detection |
| Stopień ochrony | IP55 |
| Automation | Auto Sectionalizing Function |
| Measurements | Network load current on each phase MV voltage measured through the MV/LV voltage transformer 1.000 time stamped events |
| Czujnik | - 3 Toroidal current sensors ratio 500/1 - or 2 Toroidal current sensors plus homopolar sensor ratio 500/1 - 3 Voltage sensors used for directional fault detection |
| Configuration | With a laptop equipped with a web browser |
| Installation | Outdoor use on concrete, wodden or steel poles |
| Paleta | |
|---|---|
| Rozmiar | 1 pce |
| Waga | 40.000 kg |