Reklozer NX2009053

Reklozer Ensto NX2009053
Reklozer Ensto NX2009053
Reklozer Ensto NX2009053

Reklozer NX2009053

Ensto Smartcloser is an autorecloser installed on overhead distribution network. It detects and interrupts momentary faults. If the fault is permanent, it automatically isolates the faulty section of the network. The use of recloser prevents customers from suffering electrical outages. Each outage corresponds to a cost for Electrical Utilities (e.g. loss of energy sales) but also for customers (e.g. loss of production for commercial and industrial).

Kod produktu NX2009053
GTIN 03700540433265
Nazwa Reklozer
Smartcloser 38kV 630A 12,5 kA
Skontaktuj się ze działem sprzedaży

Informacja techniczna

Specyfikacja techniczna
Ciężar 200 kg
Wysokość 1252 mm
Szerokość 680 mm
Długość 1132 mm
Normy IEEE C37.60,IEC 62271-111
Rated Voltage (Ur) 38 kV
Prąd znamionowy 630 A
Mainly active load breaking 630 A
Lightning impulse withstand level of voltage (1.2/50) 170 kV
Częstotliwość znamionowa 50-60Hz
Rated symmetrical interrupting current 12.5 kA
Rated line charging breaking current 5 A
Rated cable charging breaking current 25 A
Rated no-load transformer breaking current 25 A
70 kV
Rated short-circuit making current 12.5 kA
Rated short-time making current (peak) 31.5 kA
Mechnanical endurance 5000 C/O operatoion cycles
Droga upływu 1174 mm
Stopień zanieczyszczenia 3
Altitude/above sea level 1000 m
Protection relay ANSI functions : 50P, 50N, 50SG, 46, 51P, 51N, 51SG, 67P, 67N, 67SG, 27, 59, 47, 81L, 81H, 46BC, 50BF, 49, Cold load pick up, Inrush restrain, High current lockout, Hot line tag. Automation: ANSI 79, 25, 21, loop automation
Communication protocols IEC 60870-5-101; IEC 60871-5-104, DNP3 serial, DNP3 IP, MODBUS RTU, MODBUS IP, IEC61850, GOOSE
Temperatura robocza -40 ... 55 °C
Relative humidity at 40°C 95 %

Opakowanie
Paleta
Rozmiar 1 pce
Waga 205.000 kg

Pliki do pobrania