Poprzecznik narożny SH207
SH207 is for single, three phase bare conductor lines. This is an optional structure for SH63 crossarm. SH207 crossarm is installed centrally onto the peak of the pole, thus causing no torsion on the pole. Allowed loads for the crossarm at conductor fixing points are: Fx=14.0 kN angle load, Fz=4.5 kN horizontally along conductor, Fy=4.0 kN vertically downwards.
| Kod produktu | SH207 |
| GTIN | 6418677407130 |
| Nazwa | Poprzecznik narożny 20 kV |
| Wymiary | |
|---|---|
| Ciężar | 35 kg |
| Parametry mechaniczne | |
| Dopuszczalne obciążenia w miejscu mocowania przewodu | Fx = 14.0, Fz = 4.5 kN, Fy = 4.0 kN |
| ETIM | |
| ETIM Class | EC003515 |
| Type | Angled cross arm |
| Suitable for | One pole |
| Profile shape | RHS (Rectangular Hollow Section) |
| Material | Steel |
| Surface protection | Galvanized |
| Conductor surface | Bare |
| Max. rated voltage | 20 kV |
| Paleta | |
|---|---|
| Rozmiar | 1 pce |
| Głębokość | 1200 mm |
| Szerokość | 800 mm |
| Waga | 55.000 kg |
| Paleta | |
| Rozmiar | 25 pce |
| Głębokość | 1200 mm |
| Szerokość | 800 mm |
| Waga | 1395.000 kg |