Suitable for installation as a pin insulator on an SOT24 crossarm pin. The plastic sleeve in the top groove allows pulling the conductor without stringing pulleys. The conductor can be tied to the top groove or the neck; on angles, always to the neck. Type‑tested to IEC 60383‑1:2023. The semiconductive neck and threads reduce partial discharge risk with bare conductors. Not recommended for CC; partial discharge may damage insulation. For CC, use composite line post insulators, e.g., SDI88.37M20.
| Code | SDI38 |
| GTIN | 6438389106015 |
| Name | Porcelain pin insulator 24 kV, with pulling sleeve |
