Cosse mécanique de câble LA95N13SB1
The cable lug is used for terminating conductors of cables up to 42 kV. Because of the shear head bolt construction, no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lug is longitudinally watertight. It is suitable for aluminium and copper conductors: solid and stranded, sector shaped and circular.
| Code | LA95N13SB1 |
| GTIN | 6438100407452 |
| Nom | Cosse mécanique de câble Al/Cu 10-95 mm², Ø13 mm |
| Normes | IEC 61238-1-3:2018 |
| Matériau du conducteur | Al/Cu |
| Cross section stranded circular | 10 ... 95 mm² |
| Cross section solid circular | 10 ... 95 mm² |
| Cross section stranded sector | 10 ... 70 mm² |
| Cross section solid sector | 10 ... 70 mm² |
| Poids | 0.067 kg |
| Hauteur | 51 mm |
| Largeur | 27.5 mm |
| Longueur | 72.8 mm |
| Conductor hole diameter | 12.5 mm |
| Palm hole diameter | 13 mm |
| Quantity of palm holes | 1 |
| Couple de serrage | 18.5 Nm |
| ETIM | |
| ETIM Class | EC001054 |
| Section nominale cuivre, RM | 10 ... 95 mm² |
| Section nominale cuivre, RE | 10 ... 95 mm² |
| Section nominale cuivre, SM | 10 ... 70 mm² |
| Section nominale aluminium, RM | 10 ... 95 mm² |
| Section nominale aluminium, RE | 10 ... 95 mm² |
| Section nominale aluminium, SM | 10 ... 70 mm² |
| Section nominale aluminium, SE | 10 ... 70 mm² |
| Matériau du conduit | Aluminium/copper |
| Traitement de surface | Tinned |
| Sac en plastique | |
|---|---|
| Taille | 1 pce |
| Profondeur | 300 mm |
| Hauteur | 10 mm |
| Largeur | 152 mm |
| Poids | 0.071 kg |
| Volume | 0.456 l |
| Carton | |
| Taille | 24 pce |
| Profondeur | 375 mm |
| Hauteur | 157 mm |
| Largeur | 250 mm |
| Poids | 1.946 kg |
| Volume | 14.71875 l |
| Emballage palette | |
| Taille | 1080 pcs |
| Profondeur | 1200 mm |
| Hauteur | 1035 mm |
| Largeur | 800 mm |
| Poids | 107.570 kg |
| Volume | 993.6 l |
