Cosse mécanique de câble LA240N17SB2
The cable lug is used for terminating conductors of cables up to 42 kV. Because of the shear head bolt construction, no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off. The lug is longitudinally watertight. It is suitable for aluminium and copper conductors: solid and stranded, sector shaped and circular.
| Code | LA240N17SB2 |
| GTIN | 6438100358570 |
| Nom | Cosse mécanique de câble Al/Cu 50-240 mm², Ø17 mm |
| Normes | |
|---|---|
| Normes | IEC 61238-1-3:2018 |
| Informations Techniques | |
| Matériau du conducteur | Al/Cu |
| Cross section stranded circular | 50 ... 240 mm² |
| Cross section solid circular | 50 ... 240 mm² |
| Cross section stranded sector | 50 ... 120 mm² |
| Cross section solid sector | 50 ... 150 mm² |
| Dimensions | |
| Poids | 0.206 kg |
| Hauteur | 63 mm |
| Largeur | 33 mm |
| Longueur | 114 mm |
| Conductor hole diameter | 20 mm |
| Palm hole diameter | 17 mm |
| Quantity of palm holes | 1 |
| Mécanique | |
| Couple de serrage | 32.5 Nm |
| ETIM | |
| ETIM Class | EC001054 |
| Section nominale cuivre, RM | 50 ... 240 mm² |
| Section nominale cuivre, RE | 50 ... 240 mm² |
| Section nominale cuivre, SM | 50 ... 120 mm² |
| Section nominale aluminium, RM | 50 ... 240 mm² |
| Section nominale aluminium, RE | 50 ... 240 mm² |
| Section nominale aluminium, SM | 50 ... 120 mm² |
| Section nominale aluminium, SE | 50 ... 150 mm² |
| Matériau du conduit | Aluminium/copper |
| Traitement de surface | Tinned |
| Sac en plastique | |
|---|---|
| Taille | 1 pce |
| Profondeur | 300 mm |
| Hauteur | 10 mm |
| Largeur | 152 mm |
| Poids | 0.210 kg |
| Volume | 0.456 l |
| Carton | |
| Taille | 24 pcs |
| Profondeur | 375 mm |
| Hauteur | 157 mm |
| Largeur | 250 mm |
| Poids | 5.282 kg |
| Volume | 14.71875 l |
| Emballage palette | |
| Taille | 1080 pcs |
| Profondeur | 1200 mm |
| Hauteur | 1035 mm |
| Largeur | 800 mm |
| Poids | 257.690 kg |
| Volume | 993.6 l |
