Traverse d´angle SH207
SH207 is for single, three phase bare conductor lines. This is an optional structure for SH63 crossarm. SH207 crossarm is installed centrally onto the peak of the pole, thus causing no torsion on the pole. Allowed loads for the crossarm at conductor fixing points are: Fx=14.0 kN angle load, Fz=4.5 kN horizontally along conductor, Fy=4.0 kN vertically downwards.
| Code | SH207 |
| GTIN | 6418677407130 |
| Nom | Traverse d´angle 20 kV |
| Dimensions | |
|---|---|
| Poids | 35 kg |
| Mécanique | |
| Charge permise au point de raccordement | Fx = 14.0, Fz = 4.5 kN, Fy = 4.0 kN |
| ETIM | |
| ETIM Class | EC003515 |
| Type | Angled cross arm |
| Adapté à | One pole |
| Forme du profilé | RHS (Rectangular Hollow Section) |
| Matériau | Steel |
| Traitement de surface | Galvanized |
| Surface du conducteur | Bare |
| Tension assignée max. | 20 kV |
| Emballage palette | |
|---|---|
| Taille | 1 pce |
| Profondeur | 1200 mm |
| Largeur | 800 mm |
| Poids | 55.000 kg |
| Emballage palette | |
| Taille | 25 pce |
| Profondeur | 1200 mm |
| Largeur | 800 mm |
| Poids | 1395.000 kg |
