Traverse d´angle SH207.10
SH207.10 is for single, three phase bare conductor lines. This is an optional structure for SH63 crossarm. SH207.10 crossarm is installed centrally onto the peak of A-pole, thus causing no torsion on the pole.Allowed loads for the crossarm at conductor fixing points are: Fx=14.0 kN angle load, Fz=4.5 kN horizontally along conductor, Fy=4.0 kN vertically downwards.
| Code | SH207.10 |
| GTIN | 6418677407147 |
| Nom | Traverse d´angle 20 kV, A-pole |
| Dimensions | |
|---|---|
| Poids | 33 kg |
| Mécanique | |
| Charge permise au point de raccordement | Fx = 14.0, Fz = 4.5 kN, Fy = 4.0 kN |
| ETIM | |
| ETIM Class | EC003515 |
| Type | Angled cross arm |
| Adapté à | One pole |
| Forme du profilé | RHS (Rectangular Hollow Section) |
| Matériau | Steel |
| Traitement de surface | Galvanized |
| Surface du conducteur | Bare |
| Tension assignée max. | 20 kV |
| Carton | |
|---|---|
| Taille | 1 pce |
| Poids | 33.050 kg |
| Emballage palette | |
| Taille | 25 pce |
| Profondeur | 1200 mm |
| Largeur | 800 mm |
| Poids | 846.250 kg |
