Cosse mécanique de câble LUG6-50/10LVTIN

Cosse mécanique de câble LUG6-50/10LVTIN

The cable lugs are used for terminating conductors of up to 1 kV cables. Because of the shear head bolt construction no crimping tools are needed. The required torque is achieved by tightening the bolt until the head breaks off. The lugs are longitudinally water tight and they are suitable for both aluminium and copper conductors, solid and stranded as well as for sector shaped and circular conductors.

Code LUG6-50/10LVTIN
GTIN 6438100321918
Nom Cosse mécanique de câble
Al/Cu 6-50 mm² ø 10.5 mm
Contacter le service commercial

Informations techniques

Spécifications techniques

Normes IEC 61238-1
Matériau du conducteur Al/Cu
Cross section stranded circular 6 ... 50 mm²
Cross section solid circular 6 ... 50 mm²
Cross section stranded sector 6 ... 50 mm²
Cross section solid sector 6 ... 50 mm²
Poids 0.039 kg
Hauteur 31 mm
Largeur 20 mm
Longueur 60 mm
Conductor hole diameter 10 mm
Palm hole diameter 10.5 mm
Quantity of palm holes 1
Couple de serrage 11 Nm
Classe de tension 0,6/1 (1,2) kV
ETIM
ETIM Class EC001054
Section nominale cuivre, RM 6 ... 50 mm²
Section nominale cuivre, RE 6 ... 50 mm²
Section nominale cuivre, SM 6 ... 50 mm²
Section nominale aluminium, RM 6 ... 50 mm²
Section nominale aluminium, RE 6 ... 50 mm²
Section nominale aluminium, SM 6 ... 50 mm²
Section nominale aluminium, SE 6 ... 50 mm²
Dimension métrique du filetage de raccordement 11
Matériau du conduit Aluminium/copper
Traitement de surface Tinned
Avec tête cisaillée Yes

Packaging

Sac en plastique
Taille 1 pcs
Profondeur 100 mm
Hauteur 10 mm
Largeur 300 mm
Poids 0.139 kg
Volume 0.3 l
Carton
Taille 100 pcs
Profondeur 375 mm
Hauteur 115 mm
Largeur 250 mm
Poids 14.116 kg
Volume 10.78125 l
Emballage palette
Taille 6300 pcs
Profondeur 1200 mm
Hauteur 1067 mm
Largeur 800 mm
Poids 909.308 kg
Volume 1024.32 l