Grid Automation Controller NX2009884
e-RTU2020-4S manages in Local or Remote mode from a scada, up to four substation MV swithgears.
| Code | NX2009884 |
| GTIN | 3700540436372 |
| Name | Grid Automation Controller Control box e-RTU2020-4S |
| Dimensions | |
|---|---|
| Weight | 38 kg |
| Height | 650 mm |
| Width | 330 mm |
| Length | 310 mm |
| Standards | |
| Standards | HN 64-S-44 |
| Electrical values | |
| Rated Voltage (Ur) | 0.23 kV |
| Rated insulation voltage max | 2kV 50Hz 1min 10kV 50Hz 1min on BT Input; 20kV 1.2/50µs inpluse |
| Rated impulse withstand voltage | 5 kV |
| Features | |
| Communication protocols | IEC 60870-5-101, IEC 60870-5-104, DNP3 serial, DNP3 IP, MODBUS RTU, MODBUS IP, IEC 61850 (under development). Protocols redundancy available. |
| Communication media | Digital radio, GSM/GPRS, xG router, optic fiber, PSTN, Communication media redundancy, Secured communications with secure tunnels such as VPN, OpenVPN, IPSec. Secure hardware design. |
| Protection relay | Definite time earth fault and definite time overcurrent fault detection Directional earth fault and overcurrent fault detection |
| Degree of protection | IP2XC |
| Automation | Auto Sectionalizing Function (ASF) Automatic Switching of Power Sources (ASPS) |
| Measurements | Network load current on each phase MV voltage measured through the MV/LV voltage transformer 10.000 time stamped events |
| Sensors | - 3 Openable toroidal current sensors ratio 500/1 per way - 3 Voltage sensors used for directional fault detection |
| Configuration | With a laptop equipped with a web browser |
| Installation | Installation on a wall of substations |
| Carton | |
|---|---|
| Size | 1 pce |
| Weight | 38.050 kg |
Control box ITI 2012-1S
Code: NX2009603
GTIN:
Control box ITI 2012-4S
Code: NX2007468
GTIN: 3700540424966
Control box ITI 2012-8S
Code: NX2008031
GTIN: 03700540430950
Set of 3 Toroidal openable Current Transformers
Code: NX2005373
GTIN: 03700540418262