Insulator pin is used for the installation of 24 kV porcelain pin insulator (e.g. SDI37) onto a crossarm balk. The pin is made of hot dip galvanized steel.
Code | SOT24 |
GTIN | 6418677407932 |
Name | Insulator pin H=354, round washers |
Insulator pin SOT24
Insulator pin is used for the installation of 24 kV porcelain pin insulator (e.g. SDI37) onto a crossarm balk. The pin is made of hot dip galvanized steel.
Code | SOT24 |
GTIN | 6418677407932 |
Name | Insulator pin H=354, round washers |
Dimensions | |
---|---|
Weight | 1.68 kg |
Width | 44 mm |
Length | 354 mm |
ETIM | |
ETIM Class | EC003516 |
Type of accessory/spare part | Insulator pin |
Carton | |
---|---|
Size | 10 pcs |
Depth | 389 mm |
Height | 185 mm |
Width | 264 mm |
Weight | 17.174 kg |
Volume | 18.99876 l |
Pallet package | |
Size | 360 pcs |
Depth | 1200 mm |
Height | 870 mm |
Width | 800 mm |
Weight | 638.264 kg |
Volume | 835.2 l |
Name | Code | GTIN | ||
---|---|---|---|---|
![]() |
Porcelain pin insulator SDI30SDI30 is used with bare wires or covered conductors. Suitable for installation on pin SOT24 (SFS 4385). The conductor can be tied to the top-groove or to the neck. In angles, always tie to the neck. Creepage distance 325 mm. Neck diameter 85 mm. |
SDI30 | 6418677408748 | See product |
![]() |
Porcelain pin insulator SDI37SDI37 is used with bare wires or covered conductors. Suitable for installation on pin SOT24 (SFS 4385). The plastic sleeve in the top-groove of the insulator enables pulling of conductor without using pulleys. The conductor can be tied to the top-groove or to the neck. In angles, always tie to the neck. Creepage distance 325 mm. Neck diameter 85 mm. |
SDI37 | 6418677408731 | See product |