Vinkel regel SH207
SH207 is for single, three phase bare conductor lines. This is an optional structure for SH63 crossarm. SH207 crossarm is installed centrally onto the peak of the pole, thus causing no torsion on the pole. Allowed loads for the crossarm at conductor fixing points are: Fx=14.0 kN angle load, Fz=4.5 kN horizontally along conductor, Fy=4.0 kN vertically downwards.
| Kod | SH207 |
| GTIN | 6418677407130 |
| Namn | Vinkel regel 20 kV |
| Dimensioner | |
|---|---|
| Vikt | 35 kg |
| Mekanisk | |
| Allowed loads at conductor fixing point | Fx = 14.0, Fz = 4.5 kN, Fy = 4.0 kN |
| ETIM | |
| ETIM Class | EC003515 |
| Type | Angled cross arm |
| Suitable for | One pole |
| Profile shape | RHS (Rectangular Hollow Section) |
| Material | Steel |
| Surface protection | Galvanized |
| Conductor surface | Bare |
| Max. rated voltage | 20 kV |
| Palettpaket | |
|---|---|
| Storlek | 1 pce |
| Djup | 1200 mm |
| Bredd | 800 mm |
| Vikt | 55.000 kg |
| Palettpaket | |
| Storlek | 25 pce |
| Djup | 1200 mm |
| Bredd | 800 mm |
| Vikt | 1395.000 kg |
