Porslins pinnisolator SDI37
SDI37 is used with bare wires or covered conductors. Suitable for installation on pin SOT24 (SFS 4385). The plastic sleeve in the top-groove of the insulator enables pulling of conductor without using pulleys. The conductor can be tied to the top-groove or to the neck. In angles, always tie to the neck. Creepage distance 325 mm. Neck diameter 85 mm.
| Kod | SDI37 |
| GTIN | 6418677408731 |
| Namn | Porslins pinnisolator 24 kV, with pulling sleeve |
| Vikt | 3.61 kg |
| Krypströmssträcka | 325 mm |
| Isolatornacke | 85 mm |
| Högsta systemspänning | 24 kV |
| Motståndsspänning mot impuls från torr blixt kV | ≥ 125 kV |
| Motståndsspänning våteffektfrekvens kV | ≥ 50 kV |
| Isolatorpinnet | SOT24 |
| Brottlast | 12.5 kN |
| ETIM | |
| ETIM Class | EC003514 |
| Model | Pin insulator |
| Rated voltage | 0.024 kV |
| Material | Porcelain |
| Length | 212 mm |
| Diameter | 170 mm |
| Weight | 3.61 kg |
| Creepage path | 325 mm |
| Min. dry lightning impulse withstand voltage | 125 kV |
| Wet power frequency withstand voltage | 50 kV |
| Breaking load | 12.5 kN |
| Kartong | |
|---|---|
| Storlek | 3 st |
| Djup | 520 mm |
| Höjd | 180 mm |
| Bredd | 180 mm |
| Vikt | 11.330 kg |
| Volym | 16.848 l |
| Palettpaket | |
| Storlek | 90 st |
| Djup | 1200 mm |
| Höjd | 1030 mm |
| Bredd | 800 mm |
| Vikt | 359.900 kg |
| Volym | 988.8 l |
24 kV, M20x140
Kod: SDI82.1M20
GTIN: 6438100316013
M20x140 med ST114
Kod: SDI82.1M20P
GTIN: 6438100319427
24 kV, M20x140
Kod: SDI82.2M20
GTIN: 6438100340414
Komposit stödisolator 24kV, M20x140
Kod: SDI88.1M20
GTIN: 6438389104615