Distribution box NAJDM56, three-phase in and out are branched into six single-phase outputs. The supplies are 2xL1, 2xL2 and 2xL3. The distribution box can be fixed e.g. to the installation plate by screws, max. ø 6 mm, two holes in the middle (distance between holes 75 mm) or four holes in the corners of the box. The boxes can also be fixed with two cable ties from the clamps on the box base. The third way of fixing is by using the so-called snap-on pins, for which there are four fixing holes on the box base. Weight 315 g.