Switchbox NGJKML335, single-phase continuous, for controlling two single-phased light groups. The trunk line is branched into a 3-pole output leading to a main switch. In this series there is an output for a 5-pole switch. Two light groups are controlled with the switches. In addition to the phase, neutral and protected earth are also supplied to the switch which enables connecting the supply through the switchbox to a socket outlet. In the EnstoNet installation system there are special prefabricated leads for connecting the switch to the switchbox (cable type: stranded HF cable). The distribution box can be fixed e.g. to the installation plate by screws, max. ø 6 mm, two holes in the middle (distance between holes 75 mm) or four holes in the corners of the box. The boxes can also be fixed with two cable ties from the clamps on the box base. The third way of fixing is by using the so-called snap-on pins, for which there are four fixing holes on the box base. Weight 259 g.