The 6-pole T-connector is used in connecting the operating voltage, the emergency light voltage and the control signal to the light fitting. The T-connector is fixed to the light fitting with a M20 cable gland and a counter screw. The operating voltage is supplied with three stranded 1,5 mm² connecting wires, the emergency light voltage with one stranded 1,5 mm² connecting wire and the control signal with two 1,5 mm² connecting wires. The length of the connecting wires is 250 mm. The T-connector is supplied assembled and equipped with NAC41H2.W, NAC42H2.W, NBC21H1.S and NBC22H1.S -couplers. From the T-connector the operating voltage, the emergency light voltage and the control signal are continued to the next light fitting with a separate 6-pole cableset. The cableset parts must be ordered separately. Weight 129,0 g.