Relaybox, single-phase continuous, for push button and outgoing for light group

With the relaybox NGJRM31 one light supply is controlled by an impulse relay. Push button is connected to the blue connector. In the EnstoNet installation system there are special prefabricated leads for connecting the switch to the switchbox (cable type: stranded HF cable). It is easy to connect the stranded wires also to switches equipped with screwless terminals. The distribution box can be fixed e.g. to the installation plate by screws, max. ø 6 mm, two holes in the middle (distance between holes 75 mm) or four holes in the corners of the box. The boxes can also be fixed with two cable ties from the clamps on the box base. The third way of fixing is by using the so-called snap-on pins, for which there are four fixing holes on the box base. Weight 319 g.

Produkty